Specs
- Morten Mortensen
Width | 230mm |
|
|---|---|---|
Height | 49-77mm front to back (including foot switches) |
|
Depth | 151mm |
|
Rear recess depth | 30mm |
|
Weight | 830g |
|
Power requirement | 9-24v, 1000+mA. Both center-negative and center-positive polarity will work. | If USB powered devices are attached to the USB host ports, the power requirement increases accordingly. *See table below. |
Ports | Ethernet USB Host (MIDI In/Out) x2 Expression In x2 3.5mm TRS MIDI Out x2 5-pin DIN MIDI Out 5-pin DIN MIDI In |
|
Power requirements
MORTRIX requires 1000mA at 9 Volt to run. This is equivalent to 9 Watt.
Connecting USB devices that are not self-powered will increase the power consumption. Each USB port can supply up to 500mA to the USB device.
Thus the maximum power requirements in various supply and load configurations are listed below:
Adapter Voltage vs. rated Power and Current | 9V | 12V | 24V | Power |
|---|---|---|---|---|
MORTRIX unit | 1000mA | 750mA | 375mA | 9W |
MORTRIX unit + 1 USB device | 1280mA | 960mA | 480mA | 11.5W |
MORTRIX unit + 2 USB devices | 1560mA | 1170mA | 590mA | 14W |
MORTRIX User Manual